If you want to live in a container for a long time, you should generally follow the following installation standards:
1. The installation of steel structural parts must meet standard requirements. Do not omit the positions that need to be welded, and do not weld incorrectly, which may cause instability or even cracking in the later period.
2. The wall should be installed horizontally and vertically, the caulking should be dense and smooth, the deep and shallow seams should be of the same width, and the board surface should not be damaged.
3. If you need to paste wallpaper indoors, make sure it is smooth, bubble-free and clean.
4. The ceiling should be assembled flat and with straight seams, and the gaps should be consistent. The wallpaper should be clean. There should be no broken spots on the board surface. Any damage to the wallpaper surface during transportation should be repaired.
5. The floor slabs should be laid with dust. Floor slabs with cracks on the slabs are prohibited from being installed and used.

6. The surface of the cement or fine stone concrete surface layer should be densely calendered, and no defects such as cracks, peeling, sanding, and hollowing are allowed.
7. Asbestos tiles must be laid in the leeward direction according to the local wind direction characteristics, and the eaves should be kept straight. There should be no cracks in the tiles, the tile hooks should be tightened appropriately, and there should be no leakage in the roof.
8. The tinplate gutter joints of the container mobile house are welded firmly, and the joints must be anti-corrosion treated. There should be no accumulation of water in the gutter and no water leakage.
9. Doors and windows should be installed accurately and tightened with bolts.